Initial implementation of glabels-batch.

Note: must currently use QGuiApplication instead of QCoreApplication to
support QFont.  Unfortunately, this means that glabels-batch must run
within a windowing system.  Ideally, it would not have this requirement.

glabels/CMakeLists.txt

@@ -44,6 +44,10 @@ configure_file (Config.h.in ${CMAKE_CURRENT_BINARY_DIR}/Config.h @ONLY)
 #=======================================
 # Sources
 #=======================================
+
+#
+# glabels executable
+#
 set (glabels_sources
   glabels_main.cpp
   AboutDialog.cpp
@@ -213,6 +217,101 @@ target_link_libraries (glabels-qt
 )
 
 
+#
+# glabels-batch executable
+#
+set (glabels-batch_sources
+  glabels-batch_main.cpp
+  BarcodeBackends.cpp
+  BarcodeStyle.cpp
+  Category.cpp
+  ColorNode.cpp
+  DataCache.cpp
+  Db.cpp
+  Distance.cpp
+  FileUtil.cpp
+  Frame.cpp
+  FrameCd.cpp
+  FrameEllipse.cpp
+  FrameRect.cpp
+  FrameRound.cpp
+  Handles.cpp
+  LabelModel.cpp
+  LabelModelObject.cpp
+  LabelModelBarcodeObject.cpp
+  LabelModelBoxObject.cpp
+  LabelModelEllipseObject.cpp
+  LabelModelImageObject.cpp
+  LabelModelLineObject.cpp
+  LabelModelShapeObject.cpp
+  LabelModelTextObject.cpp
+  Layout.cpp
+  Markup.cpp
+  Outline.cpp
+  PageRenderer.cpp
+  Paper.cpp
+  Point.cpp
+  RawText.cpp
+  Region.cpp
+  Settings.cpp
+  Size.cpp
+  StrUtil.cpp
+  Template.cpp
+  TextNode.cpp
+  Units.cpp
+  Vendor.cpp
+  XmlCategoryParser.cpp
+  XmlLabelCreator.cpp
+  XmlLabelParser.cpp
+  XmlPaperParser.cpp
+  XmlTemplateCreator.cpp
+  XmlTemplateParser.cpp
+  XmlUtil.cpp
+  XmlVendorParser.cpp
+)
+
+set (glabels-batch_qobject_headers
+  BarcodeBackends.h
+  LabelModel.h
+  LabelModelObject.h
+  LabelModelBarcodeObject.h
+  LabelModelBoxObject.h
+  LabelModelEllipseObject.h
+  LabelModelImageObject.h
+  LabelModelLineObject.h
+  LabelModelShapeObject.h
+  LabelModelTextObject.h
+  PageRenderer.h
+  Settings.h
+)
+
+qt5_wrap_cpp (glabels-batch_moc_sources ${glabels-batch_qobject_headers})
+
+if (WIN32)
+  # Windows resource file
+  set (glabels-batch_win_rc glabels-batch.rc)
+endif ()
+
+add_executable (glabels-batch-qt WIN32
+  ${glabels-batch_sources}
+  ${glabels-batch_moc_sources}
+  ${glabels-batch_win_rc}
+)
+
+target_link_libraries (glabels-batch-qt
+  Barcode
+  Merge
+  glbarcode
+  ${Qt5PrintSupport_LIBRARIES}
+  ${Qt5Xml_LIBRARIES}
+  ${Qt5Svg_LIBRARIES}
+  ${ZLIB_LIBRARIES}
+  ${GNUBARCODE_LIBRARIES}
+  ${LIBQRENCODE_LIBRARIES}
+  ${LIBZINT_LIBRARIES}
+)
+
+
 #=======================================
 # Where to find stuff
 #=======================================

glabels/Db.cpp

@@ -430,7 +430,6 @@ namespace glabels
 	{
 		if ( !isTemplateKnown( tmplate->brand(), tmplate->part() ) )
 		{
-			tmplate->initPreview();
 			mTemplates << tmplate;
 		}
 		else

glabels/PageRenderer.cpp

@@ -44,12 +44,15 @@ namespace glabels
 	}
 
 
-	PageRenderer::PageRenderer()
+	PageRenderer::PageRenderer( const LabelModel* model )
 		: mModel(nullptr), mNCopies(0), mStartLabel(0),
 		  mPrintOutlines(false), mPrintCropMarks(false), mPrintReverse(false),
 		  mIPage(0), mIsMerge(false), mNPages(0)
 	{
-		// empty
+		if ( model )
+		{
+			setModel( model );
+		}
 	}
 
 
@@ -182,6 +185,34 @@ namespace glabels
 	}
 
 	
+	///
+	/// Print
+	///
+	void PageRenderer::print( QPrinter* printer ) const
+	{
+		QSizeF pageSize( mModel->tmplate()->pageWidth().pt(), mModel->tmplate()->pageHeight().pt() );
+		printer->setPageSize( QPageSize(pageSize, QPageSize::Point) );
+		printer->setFullPage( true );
+		printer->setPageMargins( 0, 0, 0, 0, QPrinter::Point );
+
+		QPainter painter( printer );
+			
+		QRectF rectPx  = printer->paperRect( QPrinter::DevicePixel );
+		QRectF rectPts = printer->paperRect( QPrinter::Point );
+		painter.scale( rectPx.width()/rectPts.width(), rectPx.height()/rectPts.height() );
+
+		for ( int iPage = 0; iPage < mNPages; iPage++ )
+		{
+			if ( iPage )
+			{
+				printer->newPage();
+			}
+
+			printPage( &painter, iPage );
+		}
+	}
+
+
 	///
 	/// Print page using persistent page number
 	///

glabels/PageRenderer.h

@@ -28,6 +28,7 @@
 #include "Merge/Record.h"
 
 #include <QPainter>
+#include <QPrinter>
 #include <QRect>
 #include <QVector>
 
@@ -50,7 +51,7 @@ namespace glabels
 		// Life Cycle
 		/////////////////////////////////
 	public:
-		PageRenderer();
+		PageRenderer( const LabelModel* model = nullptr );
 
 
 		/////////////////////////////////
@@ -68,6 +69,7 @@ namespace glabels
 		int nItems() const;
 		int nPages() const;
 		QRectF pageRect() const;
+		void print( QPrinter* printer ) const;
 		void printPage( QPainter* painter ) const;
 		void printPage( QPainter* painter, int iPage ) const;
 

glabels/PrintView.cpp

@@ -41,6 +41,7 @@ namespace glabels
 
 		preview->setRenderer( &mRenderer );
 		mPrinter = new QPrinter( QPrinter::HighResolution );
+		mPrinter->setColorMode( QPrinter::Color );
 	}
 
 
@@ -121,11 +122,6 @@ namespace glabels
 	///
 	void PrintView::onPrintButtonClicked()
 	{
-		QSizeF pageSize( mModel->tmplate()->pageWidth().pt(), mModel->tmplate()->pageHeight().pt() );
-		mPrinter->setPageSize( QPageSize(pageSize, QPageSize::Point) );
-		mPrinter->setFullPage( true );
-		mPrinter->setPageMargins( 0, 0, 0, 0, QPrinter::Point );
-
 		QPrintDialog printDialog( mPrinter, this );
 
 		printDialog.setOption( QAbstractPrintDialog::PrintToFile,        true );
@@ -137,21 +133,7 @@ namespace glabels
 
 		if ( printDialog.exec() == QDialog::Accepted )
 		{
-			QPainter painter( mPrinter );
+			mRenderer.print( mPrinter );
-			
-			QRectF rectPx  = mPrinter->paperRect( QPrinter::DevicePixel );
-			QRectF rectPts = mPrinter->paperRect( QPrinter::Point );
-			painter.scale( rectPx.width()/rectPts.width(), rectPx.height()/rectPts.height() );
-
-			for ( int iPage = 0; iPage < mRenderer.nPages(); iPage++ )
-			{
-				if ( iPage )
-				{
-					mPrinter->newPage();
-				}
-
-				mRenderer.printPage( &painter, iPage );
-			}
 		}
 	}
 

glabels/Template.cpp

@@ -207,12 +207,6 @@ namespace glabels
 	}
 	
 
-	const MiniPreviewPixmap& Template::preview() const
-	{
-		return mPreview;
-	}
-	
-
 	const QList<Frame*>& Template::frames() const
 	{
 		return mFrames;
@@ -231,12 +225,6 @@ namespace glabels
 	}
 
 
-	void Template::initPreview()
-	{
-		mPreview = MiniPreviewPixmap( this, TEMPLATE_PREVIEW_SIZE, TEMPLATE_PREVIEW_SIZE );
-	}
-
-
 	bool Template::operator==( const Template& other ) const
 	{
 		return (mBrand == other.mBrand) && (mPart == other.mPart);

glabels/Template.h

@@ -36,9 +36,6 @@
 namespace glabels
 {
 
-	const int TEMPLATE_PREVIEW_SIZE = 80;
-
-
 	class Template
 	{
 		Q_DECLARE_TR_FUNCTIONS(Template)
@@ -87,9 +84,6 @@ namespace glabels
 		void addCategory( const QString& categoryId );
 		void addFrame( Frame* frame );
 
-		void initPreview();
-		const MiniPreviewPixmap& preview() const;
-
 		const QList<Frame*>& frames() const;
 
 		bool operator==( const Template& other ) const;
@@ -116,8 +110,6 @@ namespace glabels
 		QStringList    mCategoryIds;
 
 		QList<Frame*>  mFrames;
-
-		MiniPreviewPixmap mPreview;
 	};
 
 }

glabels/TemplatePicker.cpp

@@ -38,7 +38,7 @@ namespace glabels
 		setSpacing( 24 );
 		setWordWrap( true );
 		setUniformItemSizes( true );
-		setIconSize( QSize(TEMPLATE_PREVIEW_SIZE, TEMPLATE_PREVIEW_SIZE) );
+		setIconSize( QSize(TemplatePickerItem::SIZE, TemplatePickerItem::SIZE) );
 	}
 
 

glabels/TemplatePickerItem.cpp

@@ -20,6 +20,8 @@
 
 #include "TemplatePickerItem.h"
 
+#include "MiniPreviewPixmap.h"
+
 #include <QHBoxLayout>
 #include <QIcon>
 #include <QListWidgetItem>
@@ -36,9 +38,9 @@ namespace glabels
 	{
 		mTmplate = tmplate;
 
-		setIcon( QIcon(tmplate->preview()) );
+		setIcon( QIcon( MiniPreviewPixmap( tmplate, SIZE, SIZE ) ) );
 		setText( tmplate->name() );
-
+		
 		setFlags( Qt::ItemIsSelectable | Qt::ItemIsEnabled );
 	}
 

glabels/TemplatePickerItem.h

@@ -36,6 +36,8 @@ namespace glabels
 	///
 	class TemplatePickerItem : public QListWidgetItem
 	{
+	public:
+		static const int SIZE = 80;
 
 		/////////////////////////////////
 		// Life Cycle

glabels/XmlLabelParser.cpp

@@ -54,8 +54,8 @@ namespace glabels
 
 		if ( !file.open( QFile::ReadOnly ) )
 		{
-			qWarning() << "Error: Cannot read file " << qPrintable(fileName)
+			qWarning() << "Error: Cannot read file" << fileName
-			           << ": " << file.errorString();
+			           << ":" << file.errorString();
 			return nullptr;
 		}
 

glabels/glabels-batch_main.cpp

@@ -0,0 +1,181 @@
+/*  glabels-batch_main.cpp
+ *
+ *  Copyright (C) 2013-2016  Jim Evins <evins@snaught.com>
+ *
+ *  This file is part of gLabels-qt.
+ *
+ *  gLabels-qt is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  gLabels-qt is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with gLabels-qt.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "BarcodeBackends.h"
+#include "FileUtil.h"
+#include "Db.h"
+#include "LabelModel.h"
+#include "PageRenderer.h"
+#include "Settings.h"
+#include "Version.h"
+#include "XmlLabelParser.h"
+
+#include "Merge/Factory.h"
+
+#include <QApplication>
+#include <QCommandLineParser>
+#include <QLibraryInfo>
+#include <QLocale>
+#include <QPrinter>
+#include <QPrinterInfo>
+#include <QTranslator>
+#include <QtDebug>
+
+
+int main( int argc, char **argv )
+{
+	QGuiApplication app( argc, argv );
+
+	QCoreApplication::setOrganizationName( "glabels.org" );
+	QCoreApplication::setOrganizationDomain( "glabels.org" );
+	QCoreApplication::setApplicationName( "glabels-batch-qt" );
+	QCoreApplication::setApplicationVersion( glabels::Version::STRING );
+
+	//
+	// Setup translators
+	//
+	QLocale locale = QLocale::system();
+	QString qtTranslationsDir = QLibraryInfo::location( QLibraryInfo::TranslationsPath );
+	QString myTranslationsDir = glabels::FileUtil::translationsDir().canonicalPath();
+	
+	QTranslator qtTranslator;
+	if ( qtTranslator.load( locale, "qt", "_", qtTranslationsDir ) )
+	{
+		app.installTranslator(&qtTranslator);
+	}
+
+	QTranslator glabelsTranslator;
+	if ( glabelsTranslator.load( locale, "glabels", "_", myTranslationsDir ) )
+	{
+		app.installTranslator(&glabelsTranslator);
+	}
+
+	QTranslator templatesTranslator;
+	if ( templatesTranslator.load( locale, "templates", "_", myTranslationsDir ) )
+	{
+		app.installTranslator(&templatesTranslator);
+	}
+
+
+	//
+	// Parse command line
+	//
+	const QList<QCommandLineOption> options = {
+		{{"p","printer"},
+		 QString( QCoreApplication::translate( "main", "Send output to <printer>. (Default=\"%1\")") ).arg( QPrinterInfo::defaultPrinterName() ),
+		 QCoreApplication::translate( "main", "printer" ),
+		 QPrinterInfo::defaultPrinterName() },
+		
+		{{"o","output"},
+		 QCoreApplication::translate( "main", "Set output filename to <filename>. (Default=\"output.pdf\")" ),
+		 QCoreApplication::translate( "main", "filename" ),
+		 "output.pdf" },
+		
+		{{"s","sheets"},
+		 QCoreApplication::translate( "main", "Set number of sheets to <n>. (Default=1)" ),
+		 "n", "1" },
+
+		{{"c","copies"},
+		 QCoreApplication::translate( "main", "Set number of copies to <n>. (Default=1)" ),
+		 "n", "1" },
+		
+		{{"f","first"},
+		 QCoreApplication::translate( "main", "Set starting label on 1st page to <n>. (Default=1)" ),
+		 "n", "1" },
+
+		{{"l","outlines"},
+		 QCoreApplication::translate( "main", "Print label outlines." ) },
+		
+		{{"m","crop-marks"},
+		 QCoreApplication::translate( "main", "Print crop marks." ) },
+		
+		{{"r","reverse"},
+		 QCoreApplication::translate( "main", "Print in reverse (mirror image)." ) }
+	};
+
+
+	QCommandLineParser parser;
+	parser.setApplicationDescription( QCoreApplication::translate( "main", "gLabels Label Designer (Batch Front-end)" ) );
+	parser.addOptions( options );
+	parser.addHelpOption();
+	parser.addVersionOption();
+	parser.addPositionalArgument( "file",
+	                              QCoreApplication::translate( "main", "gLabels project file to print." ),
+	                              "file" );
+	parser.process( app );
+	
+
+	//
+	// Initialize subsystems
+	//
+	glabels::Settings::init();
+	glabels::Db::init();
+	glabels::merge::Factory::init();
+	glabels::BarcodeBackends::init();
+
+	
+	if ( parser.positionalArguments().size() == 1 )
+	{
+		QString filename = parser.positionalArguments().first();
+
+		glabels::LabelModel *label = glabels::XmlLabelParser::readFile( filename );
+		if ( label )
+		{
+			QPrinter printer( QPrinter::HighResolution );
+			printer.setColorMode( QPrinter::Color );
+			if ( parser.isSet("printer") )
+			{
+				qDebug() << "Batch mode.  printer =" << parser.value("printer");
+				printer.setPrinterName( parser.value("printer") );
+			}
+			else if ( parser.isSet("output") )
+			{
+				qDebug() << "Batch mode.  output =" << parser.value("output");
+				printer.setOutputFileName( parser.value("output") );
+			}
+			else
+			{
+				qDebug() << "Batch mode.  printer =" << QPrinterInfo::defaultPrinterName();
+			}
+
+			glabels::PageRenderer renderer( label );
+			renderer.setNCopies( 1 );
+			renderer.setStartLabel( parser.value( "first" ).toInt() - 1 );
+			renderer.setPrintOutlines( parser.isSet( "outlines" ) );
+			renderer.setPrintCropMarks( parser.isSet( "crop-marks" ) );
+			renderer.setPrintReverse( parser.isSet( "reverse" ) );
+			renderer.print( &printer );
+		}
+	}
+	else
+	{
+		if ( parser.positionalArguments().size() == 0 )
+		{
+			qWarning() << "Error: missing glabels project file.";
+		}
+		else
+		{
+			qWarning() << "Error: batch mode supports only one glabels project file.";
+		}
+		return -1;
+	}
+		
+	return 0;
+}

translations/glabels_C.ts

@@ -825,7 +825,7 @@
     </message>
     <message>
         <location filename="../glabels/BarcodeBackends.cpp" line="131"/>
-        <location filename="../glabels/BarcodeBackends.cpp" line="445"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="439"/>
         <source>UPC-E</source>
         <translation type="unfinished"></translation>
     </message>
@@ -841,7 +841,7 @@
     </message>
     <message>
         <location filename="../glabels/BarcodeBackends.cpp" line="137"/>
-        <location filename="../glabels/BarcodeBackends.cpp" line="379"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="373"/>
         <source>ISBN</source>
         <translation type="unfinished"></translation>
     </message>
@@ -852,7 +852,7 @@
     </message>
     <message>
         <location filename="../glabels/BarcodeBackends.cpp" line="143"/>
-        <location filename="../glabels/BarcodeBackends.cpp" line="307"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="301"/>
         <source>Code 128</source>
         <translation type="unfinished"></translation>
     </message>
@@ -868,13 +868,13 @@
     </message>
     <message>
         <location filename="../glabels/BarcodeBackends.cpp" line="149"/>
-        <location filename="../glabels/BarcodeBackends.cpp" line="376"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="370"/>
         <source>Interleaved 2 of 5</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <location filename="../glabels/BarcodeBackends.cpp" line="151"/>
-        <location filename="../glabels/BarcodeBackends.cpp" line="268"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="265"/>
         <source>Codabar</source>
         <translation type="unfinished"></translation>
     </message>
@@ -890,7 +890,7 @@
     </message>
     <message>
         <location filename="../glabels/BarcodeBackends.cpp" line="157"/>
-        <location filename="../glabels/BarcodeBackends.cpp" line="304"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="298"/>
         <source>Code 93</source>
         <translation type="unfinished"></translation>
     </message>
@@ -920,282 +920,282 @@
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="261"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="259"/>
         <source>Aztec Code</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="265"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="262"/>
         <source>Aztec Rune</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="273"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="268"/>
         <source>Code One</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="277"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="271"/>
         <source>Code 11</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="280"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="274"/>
         <source>Code 16K</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="283"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="277"/>
         <source>Code 2 of 5 Matrix</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="286"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="280"/>
         <source>Code 2 of 5 IATA</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="289"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="283"/>
         <source>Code 2 of 5 Data Logic</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="292"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="286"/>
         <source>Code 32 (Italian Pharmacode)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="301"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="295"/>
         <source>Code 49</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="310"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="304"/>
         <source>Code 128 (Mode C supression)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="313"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="307"/>
         <source>DAFT Code</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="316"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="310"/>
         <source>Data Matrix</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="319"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="313"/>
         <source>Deutsche Post Leitcode</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="322"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="316"/>
         <source>Deutsche Post Identcode</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="325"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="319"/>
         <source>Dutch Post KIX Code</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="328"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="322"/>
         <source>EAN</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="331"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="325"/>
         <source>Grid Matrix</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="334"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="328"/>
         <source>GS1-128</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="337"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="331"/>
         <source>GS1 DataBar-14</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="346"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="340"/>
         <source>GS1 DataBar-14 Stacked</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="349"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="343"/>
         <source>GS1 DataBar-14 Stacked Omni.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="352"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="346"/>
         <source>GS1 DataBar Extended Stacked</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="355"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="349"/>
         <source>HIBC Code 128</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="358"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="352"/>
         <source>HIBC Code 39</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="361"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="355"/>
         <source>HIBC Data Matrix</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="364"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="358"/>
         <source>HIBC QR Code</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="367"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="361"/>
         <source>HIBC PDF417</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="370"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="364"/>
         <source>HIBC Micro PDF417</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="373"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="367"/>
         <source>HIBC Aztec Code</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="382"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="376"/>
         <source>ITF-14</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="385"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="379"/>
         <source>Japanese Postal</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="388"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="382"/>
         <source>Korean Postal</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="391"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="385"/>
         <source>LOGMARS</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="394"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="388"/>
         <source>Maxicode</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="397"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="391"/>
         <source>Micro PDF417</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="400"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="394"/>
         <source>Micro QR Code</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="403"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="397"/>
         <source>MSI Plessey</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="406"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="400"/>
         <source>NVE-18</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="409"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="403"/>
         <source>PDF417</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="412"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="406"/>
         <source>PDF417 Truncated</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="415"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="409"/>
         <source>PLANET</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="418"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="412"/>
         <source>PostNet</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="421"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="415"/>
         <source>Pharmacode</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="424"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="418"/>
         <source>Pharmacode 2-track</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="427"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="421"/>
         <source>Pharmazentral Nummer (PZN)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="430"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="424"/>
         <source>QR Code</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="433"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="427"/>
         <source>Royal Mail 4-State</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="436"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="430"/>
         <source>Telepen</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="439"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="433"/>
         <source>Telepen Numeric</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="448"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="442"/>
         <source>USPS One Code</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/BarcodeBackends.cpp" line="451"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="445"/>
         <source>UK Plessey</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <location filename="../glabels/BarcodeBackends.cpp" line="44"/>
         <location filename="../glabels/BarcodeBackends.cpp" line="141"/>
-        <location filename="../glabels/BarcodeBackends.cpp" line="295"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="289"/>
         <source>Code 39</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <location filename="../glabels/BarcodeBackends.cpp" line="47"/>
-        <location filename="../glabels/BarcodeBackends.cpp" line="298"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="292"/>
         <source>Code 39 Extended</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <location filename="../glabels/BarcodeBackends.cpp" line="50"/>
         <location filename="../glabels/BarcodeBackends.cpp" line="125"/>
-        <location filename="../glabels/BarcodeBackends.cpp" line="442"/>
+        <location filename="../glabels/BarcodeBackends.cpp" line="436"/>
         <source>UPC-A</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2340,7 +2340,7 @@
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../glabels/PrintView.cpp" line="86"/>
+        <location filename="../glabels/PrintView.cpp" line="87"/>
         <source>(Will print a total of %1 items on %2 pages.)</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2378,6 +2378,66 @@
         <source>gLabels Label Designer</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <location filename="../glabels/glabels-batch_main.cpp" line="82"/>
+        <source>Send output to &lt;printer&gt;. (Default=&quot;%1&quot;)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../glabels/glabels-batch_main.cpp" line="83"/>
+        <source>printer</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../glabels/glabels-batch_main.cpp" line="87"/>
+        <source>Set output filename to &lt;filename&gt;. (Default=&quot;output.pdf&quot;)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../glabels/glabels-batch_main.cpp" line="88"/>
+        <source>filename</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../glabels/glabels-batch_main.cpp" line="92"/>
+        <source>Set number of sheets to &lt;n&gt;. (Default=1)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../glabels/glabels-batch_main.cpp" line="96"/>
+        <source>Set number of copies to &lt;n&gt;. (Default=1)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../glabels/glabels-batch_main.cpp" line="100"/>
+        <source>Set starting label on 1st page to &lt;n&gt;. (Default=1)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../glabels/glabels-batch_main.cpp" line="104"/>
+        <source>Print label outlines.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../glabels/glabels-batch_main.cpp" line="107"/>
+        <source>Print crop marks.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../glabels/glabels-batch_main.cpp" line="110"/>
+        <source>Print in reverse (mirror image).</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../glabels/glabels-batch_main.cpp" line="115"/>
+        <source>gLabels Label Designer (Batch Front-end)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../glabels/glabels-batch_main.cpp" line="120"/>
+        <source>gLabels project file to print.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <location filename="../glabels/glabels_main.cpp" line="83"/>
         <source>gLabels project files to open, optionally.</source>