# GPU Bakeoff — Gemma 4 Throughput: 3090 Ti vs Strix Halo

**Date:** 2026-04-20
**Host matrix:** steel141 (RTX 3090 Ti) · strix-halo (AMD Strix Halo iGPU)
**Models:** `gemma4:26b` (MoE Q4_K_M) · `gemma4:31b-it-q4_K_M` (dense Q4_K_M)
**Harness:** `scripts/gpu-bakeoff/harness.py`
**Raw data:** `scripts/gpu-bakeoff/runs/`

---

## TL;DR

| GPU | 26B (MoE) decode | 31B (dense) decode | Long-prompt prefill (26B) |
|-----|------------------|--------------------|-----------------------|
| **RTX 3090 Ti** (steel141) | **128 tok/s** | **27 tok/s** | **23,849 tok/s** |
| **AMD Strix Halo iGPU** (strix-halo) | 54 tok/s (42%) | 11 tok/s (39%) | 14,326 tok/s (60%) |

### Headline findings

1. **MoE changes everything.** `gemma4:26b` decodes **~4.7× faster** than
   `gemma4:31b` on every GPU tested, because only ~4 B of its 25.8 B
   parameters activate per token. Total parameter counts (26 B vs 31 B)
   don't predict latency; *active* parameters do.
2. **3090 Ti wins decisively on decode.** For inference workloads the
   memory-bandwidth-flop ratio of consumer Ampere GDDR6X is hard to
   beat at this price point.
3. **Strix Halo punches above its bandwidth.** Gets 42 % of 3090 Ti
   decode speed on only ~25 % of the memory bandwidth (~256 GB/s vs
   ~1008 GB/s) — good SIMD utilization, especially on the MoE model.

---

## Hardware inventory

| Host | GPU | VRAM | Bandwidth | Compute cap | Notes |
|------|-----|------|-----------|-------------|-------|
| steel141 | RTX 3090 Ti | 24 GB GDDR6X | ~1008 GB/s | 8.6 (Ampere) | Workstation. Also has a GTX 1660 SUPER as aux display card — not used for inference. Ollama on localhost. |
| strix-halo | AMD Strix Halo (Radeon 890M iGPU + XDNA 2 NPU) | Shared LPDDR5X | ~256 GB/s | — | Unified memory lets it fit models a 24 GB card can't. Ollama accessed via Tailscale. |

---

## Methodology

- Each (host × model × prompt-length) cell:
  - 1 warm-up call (discarded, absorbs model load time and JIT warm-up)
  - 3 measurement calls
  - `temperature: 0.0`, `top_k: 1` (greedy), `num_predict: 256`, `num_ctx: 4096`
  - `keep_alive: 10m` so the model stays resident between runs
- Two prompt lengths:
  - **short** (~15 tokens) — isolates decode performance, prefill time is negligible
  - **long** (~500 tokens) — stresses prefill (prompt evaluation)
- All timings come from Ollama's own `/api/generate` response fields
  (`prompt_eval_duration`, `eval_duration`, etc.), so HTTP and wall-clock
  jitter are excluded from the rates.
- Median of the 3 measurement runs is reported in tables; min/max are in
  the raw JSON.

---

## Full results

### Decode rate (tok/s, median of 3 runs)

Decode is the metric that matters most for interactive LLM use — it's
the speed of token generation after the prompt has been processed.

| Model | 3090 Ti | Strix Halo |
|-------|---------|------------|
| gemma4:26b (MoE, ~4 B active) | **128.20** | 53.86 |
| gemma4:31b (dense, 31.3 B active) | **27.15** | 10.64 |

### Prefill rate (tok/s, long ~500-token prompt, median)

Prefill is the cost of ingesting the prompt and populating the KV cache
before decode begins. Batched per-token, so short-prompt prefill numbers
are noisy (dominated by fixed overhead — see raw JSON for those); the
long-prompt numbers below are the ones to reason from.

| Model | 3090 Ti | Strix Halo |
|-------|---------|------------|
| gemma4:26b (long) | **23,849** | 14,326 |
| gemma4:31b (long) | **7,716** | 3,278 |

### Short-prompt prefill (for reference)

On a 15-token prompt, prefill tokens/sec is meaningless — prompt is too
small to amortize overhead. Included only to confirm no regression.

| Model | 3090 Ti | Strix Halo |
|-------|---------|------------|
| gemma4:26b (short) | 2,063 | 1,276 |
| gemma4:31b (short) | 661 | 292 |

---

## Why 26B decodes 4.7× faster than 31B

`gemma4:26b` is the MoE variant ("A4B" in Google's naming = *activated
4B*). Per-token inference routes through only ~4 B of its 25.8 B total
parameters. `gemma4:31b` is dense: every one of its 31.3 B parameters
participates in every token's forward pass. Memory bandwidth is the
binding constraint for decode, so the ratio of *active* params is what
you actually pay for.

Rough math (3090 Ti, 1008 GB/s, Q4_K_M ≈ 0.5 bytes/param):
- 26B MoE: 4 B × 0.5 B = 2 GB per token. Theoretical max ≈ 504 tok/s.
  Observed 128 tok/s = **25 % utilization**.
- 31B dense: 31.3 B × 0.5 B = 15.65 GB per token. Theoretical max ≈
  64 tok/s. Observed 27 tok/s = **42 % utilization**.

So dense workloads actually extract *higher* bandwidth utilization —
they're less overhead-dominated per token. But in absolute terms, MoE
wins by a large factor because the active-parameter bill is much
smaller. For interactive chat this is decisive: Seth's `mort-bot`
running `gemma4:26b` gets ~4.7× the responsiveness it would on
`gemma4:31b`, even though the models are near-equal in total params.

Why the ratio holds on both GPUs: **memory bandwidth is the bottleneck**
on both cards. Strix gets 42 % of 3090 Ti on 26B and 39 % of 3090 Ti on
31B — nearly identical ratios — because it has ~25 % of the bandwidth
and matches or slightly exceeds proportionally.

---

## When to use which GPU

**Interactive chat / agent workloads (decode-heavy).**
  - Primary: **3090 Ti** — by a wide margin. 128 tok/s on 26B is
    comfortable for real-time responses.
  - Fallback: **Strix Halo** — 54 tok/s is usable. Benefit is unified
    memory can host larger models the 24 GB 3090 Ti can't.

**Long-context / prompt-heavy workloads (prefill-heavy).**
  - Primary: **3090 Ti** again — 23,849 tok/s prefill means a
    500-token prompt ingests in ~21 ms.
  - Strix at 14,326 tok/s is ~35 ms — still interactive.

**Running models that don't fit on discrete cards.**
  - Strix Halo. Unified LPDDR5X can hold 80 GB+ models that a 24 GB
    3090 Ti can't — at the cost of lower bandwidth.
  - The largest model tested here (`gemma4:31b` Q4 at 19.9 GB) fits
    both. Q8 variants (28 GB+) only fit Strix in this matrix.

**Fine-tuning / training.**
  - Not measured here. 3090 Ti's 24 GB limits batch size on 20 B+
    models.

---

## Open questions / follow-ups

1. **Strix max-model fit.** Strix can host models that wouldn't fit the
   3090 Ti. A follow-up would pull a larger model (70 B+ quantized) on
   strix-halo and measure the Strix-only performance ceiling.
2. **Q8 vs Q4 on Strix.** Same model, two quantizations — quality/speed
   tradeoff characterization.

---

## Raw data

All per-run JSON traces are under `scripts/gpu-bakeoff/runs/`:

```
runs/
├── steel141/
│   ├── gemma4-26b/{short,long}.json
│   └── gemma4-31b/{short,long}.json
└── strix-halo/
    ├── gemma4-26b/{short,long}.json
    └── gemma4-31b/{short,long}.json
```

Each JSON contains the warmup call and all 3 measurement calls with
every field Ollama's `/api/generate` returns (token counts, durations,
loaded-at, context length), plus a `summary` with min/median/max for
prefill and decode rates.